Tips on spraying Clore
Instruction Videos
Ready to use kit (5, 15 gallons)
Watch this video if you have our ready to use jugs labeled Clore Wildfire Defense.
Concentrate kit (10, 20, 30 gallons)
Watch this video if you have our concentrate jugs labeled Clore Wildfire S-B3.
Where should I be spraying Clore?
General Recommendations
You should spray:
- A 3–5 foot wide perimeter around structures, including homes, garages, sheds, barns, and other buildings.
- Wooden fences, especially where they connect directly to a structure.
- Decks, porches, patios, and stairs made of wood or other combustible materials.
- Mulch beds, bark, pine needles, and other combustible landscaping immediately adjacent to structures.
Dry grass and weeds near buildings, fences, propane tanks, and other assets. - Shrubs, hedges, ornamental plants, and small trees that are close enough to a structure to transmit flames.
- Wood piles, lumber stacks, and firewood stored near buildings.
- Outdoor furniture, pergolas, gazebos, and play structures made from combustible materials.
- Storage areas containing combustible materials.
You should not spray:
- Directly on metals
- Generally not recommended to spray already fire-resistant materials
Test on a small area first if spraying on structures. Use the below coverage levels as guidance for spraying on vegetation.
Grass & Weeds
- Height: Up to 3 in.
- Coverage: 200 sq ft
Brush
- Height: 3 in. to 2 ft
- Coverage: 100 sq ft
Bushes
- Height: 2 ft to 4 ft
- Coverage: 50 sq ft
Directions for setting up your kit
1. Setting The Stage - Start by assembling your sprayer, referring to the manual if you need a quick hand or to troubleshoot. To ensure a smooth job, give your battery a full 2.5-hour charge to enjoy 2 hours of uninterrupted protection, plus ensure all hose fittings are snug to keep things leak-free. Extra rubber seals if you need them!
2. Filling Up - Carefully pour the Clore solution into the tank. Pro-tip on weight: A full tank weighs about 36 lbs. If you want a lighter load, feel free to fill it halfway (18 lbs) for easier moving!
Design Note: Included are tiny 'breathing' holes in the lid to keep the system balanced. To keep things tidy, simply keep the kit upright while you work!
3. Let's Get Spraying - Grab your preferred nozzle (we love the Sunflower for great coverage). Evenly coat your target surfaces until they are glistening and just beginning to drip, ensuring all sides of surface are coated. You can easily adjust the pressure using the voltage dial to find your perfect flow. Pro tip: with denser vegetation, expect to use more product.
4. Creating Your Safety Zone - For the best protection, we recommend treating: The immediate 5-15ft barrier around your home. Extra structures like sheds or decks. Combustible house siding and non-hardened roofs.
Note on Metals: If you notice a little discoloration on metal surfaces, don't worry! It's not corrosive and usually washes right off with a bit of water.
5. Refreshing The Sprayer - To keep your equipment in top shape, give it a quick rinse after use. Empty any remaining solution, add a gallon of fresh water, and give the tank a gentle swish. Turn the sprayer on to flush the lines, and repeat this twice more to keep everything clear and clean.
6. Storing Your Kit - The Sprayer: Keep it under cover with the lid open so it can breathe. The Solution: Unsealed jugs stay fresh for up to a week with the cap on tight. Sealed jugs are good to go for up to 3 years! Store both in a covered, cool area.
Frequently Asked Questions
At Clore, we are dedicated to providing our customers with the best possible experience. That's why we put our product through rigorous testing to ensure it meets the highest standards of quality and performance. However, it is important to note that the effectiveness of a fire retardant product can depend on a variety of factors, including the specific type of material it is applied to, the conditions of the environment in which it is used, and how the product is applied. Please follow all of the instructions on how to properly apply and reapply Clore Wildfire Defense for best results.
Clore Wildfire Defense is intended to act as a fire retardant around homes, farms, and in yards. We suggest using Clore Wildfire Defense to create a protective barrier around or adjacent to flammable items. Examples include areas inside a yard, grass, bushes, and brush. While the product is primarily designed for use on vegetation, it is also compatible with wooden materials. Always avoid sensitive surfaces and test a small area before spraying on structures. In emergency situations, spraying exterior surfaces and structures may provide additional protection.
Our product was tested by StillMeadow, Inc. and showed no clinical signs of acute oral toxicity during the testing. The test substance acute oral LD50 is greater than 5000mg/kg. This represents category IV in the EPA 4 toxicity categories for acute hazards of pesticide products; which is the lowest hazard category.
On average, it takes 5 minutes a gallon to apply. A garden sprayer is highly recommended. Effectiveness may be affected by specific garden sprayers so we suggest that you use our referred sprayers for best results.
No, if applied according to the instructions, you will not be able to tell any difference when Clore Wildfire Defense is sprayed on any surface. Our product is intended to act as a clear coating and will dry once applied.
We recommend that customers reapply our product once per year or after heavy rain/weather conditions. Weather conditions may degrade the effectiveness of Clore Wildfire Defense. Five gallons of Clore Wildfire Defense can cover approximately 1,000 square feet of land.
Our product is safe for use around animals. However, consumption should be avoided. Our product has an LD50 value greater than 5000 mg/kg, which means it is considered to be practically non-toxic.
To ensure its effectiveness, reapply Clore Wildfire Defense following substantial rainfall or extensive watering greater than 2 inches. These conditions may degrade the effectiveness of Clore Wildfire Defense.
Clore operates under a trade secret and does not publicly disclose all ingredients and chemicals in its product. However, it is made using salts and fertilizers, and we have testing to confirm that it is non-toxic to plants, humans, and the environment.
CA Fire Marshal Licensed
License Number: C-027583
This license number confirms that our product has been tested and approved by the California State Fire Marshal. It meets the flame-resistance standards outlined in Section 13115 of the California Health and Safety Code and is listed on the California Approved List of Flame Retardant Chemicals and Fabrics. This certification ensures our product complies with state safety requirements for flame-retardant use.